This thing revs to about 9000 RPM while shaking so much the car might flip over. ...

1300 hp, 1061 Nm, 1200 air scfm, 2.3L V4, 11000 rpm : - No "nitrous" (no starter that acts like nitrous, just 1500 r...

A super gas rc running with only gasoline no nitro, make about 4,2 nm and 8 hp and can rev up to 18k rpm limited and ...

The 3 rotor EWC Mk 4 2.08 hp per cc is an engine that I have been developing over the last few months with input from...

like pilot01's radial 37 (biblically accurate radial engine) but it converted to inline (displacement smaller) the...

hp: 87 nm: 53 top speed: 222kmh Rumble idle/ timing kuda at 3k rpm NOTED: When you start, please turn down the ...

Rob Dahm is taking too long to get the 12 rotor fully running so I created what he thinks the 12 rotor is capable of....

the Sambra VGTurismo (or originally VT2000) is a concept car idealized by italian manufacturer Sambra. Polyphony Digi...

the Corvel Longrod is a concept car idealized by the north american car manufacturer Corvel J. Customs. it is, as sta...

The Suzuki RG Sports 110 is an underbone 2 stroke motorcycle with a 109.9cc (52.6mm × 50.6mm) single cylinder Jet-coo...

2.0L TSi changed into a 2.0L HDi (High Pressure Direct Injection System) why did i name it HDi ? because of the "fuel...

This is a converted bike from lc 5s to x1r 5 speed, block size has been bore up to 70mm and the crankshaft rod length...

I generated this engine and modified the scripts. The 8th gear is not the fastest. Only fast in acceleration till 15...

Very power full engine (This is the Tuned version of the subaru impreza of tuner esr mys) +2000 hp, 1000 lb_ft to ...

MO POWAH : -Vtec inside -2.5L Modded engine (normally 1.8L) -Very normal chamshaft lift (see lines : 275, 2...