Stock motor, 78 hp of power on the ES dyno. Relatively close to the actual engine power

305hp & 180lb-ft of torque whats more? Finally a successful H2R engine. Built to spec?

Uhhh sorry if this is a shit engine I did my best. Just to keep in mind that I couldn't make a H2R engine so I made t...

Engine is same that real.

This Single Cylinder engine can reach 9000 RPM, thanks to its small crankshaft and size. The Dyno claims that it has ...

Engine type: Inline-4 Displacement: 1441 cc Power: 195 HP Torque: 154 Nm

I8 Engines or "straight-eights" were very popular in race cars during the 20's and 30's and ranged in volume from 2 L...

P-twin that KTM wanted to sound like the V-twin LC8 engine so it has a 285 degree firing interval which sets it apart...

Ninja 400, but unrestricted. Bigger intake, higher compression. If you want to make this motor more powerfull (and un...

Engine : 4-stroke, Parallel Twin, DOHC, liquid-cooled Displacement : 399cc Bore x Stroke : 70.0 x 51.8mm Compress...

4.2L inline 6 with the I6 journal rod angles. This thing has backfiring on every full throttle press. Has great sound.

2L I4 engine with the i4 journal rod angles. Firing order 1&4-2&3. This thing is very responsive at RPM so you can re...

597 cc. 2300 idle RPM. 3500 max RPM. For all your scooter needs. Gives roughly 20-30 HP. yes, sounds bad, but just im...

Same engine as shown in my YT tutorial

Same engine as shown in my YT tutorial